Fiberglass Entry Door Replacement & Installation

Falcon WD supplies and professionally installs custom fiberglass entry door systems for residential replacement projects across the Greater Toronto Area and selected Ontario communities. Each system is measured for the approved opening and configured with the selected frame, sill, glass, hardware and finishing.

Fiberglass entry doors are often chosen for smooth or woodgrain surfaces, design flexibility and low-maintenance exterior performance. The complete entrance still needs to be selected as one coordinated system. Falcon WD reviews the current slab, frame, sill, opening size, exterior exposure, security priorities and interior and exterior finishes before ordering.

Fiberglass Entry Door Replacement for Ontario Homes

A complete replacement system may include the fiberglass door slab, reinforced frame, threshold, weatherstripping, hinges, glass, sidelites, transom, handleset and locking hardware. Proper sizing, anchoring, alignment and sealing help these components operate as intended.

After final measurement, Falcon WD custom-orders the approved system. The written quotation identifies the product configuration and installation scope, including exterior caulking or capping, interior casing or jamb extensions when quoted, cleanup and disposal.

When Should a Fiberglass Entry Door Be Replaced?

Homeowners often consider replacement when the existing entrance no longer closes, seals or locks reliably, or when a new design and configuration is planned. Because the frame and opening affect door performance, the complete entrance should be reviewed.

• The slab rubs, binds or does not latch consistently.
• Drafts, water or daylight appear around the perimeter.
• The frame, sill or lower jamb is deteriorated.
• Insulated glass has failed or privacy requirements have changed.
• Weatherstripping, hinges or locking points are worn or misaligned.
• The homeowner wants a woodgrain finish, new colour, different glass or a wider configuration.

Falcon WD focuses on full residential exterior door replacement and installation. Maintenance of individual parts or isolated door repair is a different service and is not represented as the scope of this page.

Fiberglass Entry Door Styles and Options

Smooth and Woodgrain Surfaces

Fiberglass slabs may be offered with smooth surfaces for factory-applied paint or embossed woodgrain textures designed to coordinate with traditional and contemporary entrances. Stainable finishes are available on selected product lines. Grain, colour and finish availability vary by manufacturer and panel design.

Single, Double, Sidelite and Transom Configurations

Available layouts may include a single entry door, double doors, one or two sidelites, a transom, or combinations of these elements. Maximum dimensions and available panel styles depend on the selected system. Opening enlargement and structural changes are quoted separately from standard replacement.

Decorative, Privacy and Clear Glass

Glass options may include clear, textured, privacy and decorative designs in different shapes and sizes. Glass area affects daylight, privacy and the complete door’s performance. Energy ratings and certification depend on the exact door-and-glass configuration rather than the slab material alone.

Colours, Handles and Locking Hardware

Selected systems offer factory-applied colours, different interior and exterior finishes, coordinated frames, standard handlesets, electronic deadbolts and multipoint locking options. Dark finishes and strongly exposed entrances require product-specific review because orientation, heat and manufacturer limitations can affect the recommended configuration.

Fiberglass or Steel Entry Door?

Fiberglass and steel systems can both provide suitable residential entrances. Fiberglass is commonly considered for woodgrain appearance, selected premium finishes and resistance to everyday dents in suitable applications. Steel is often selected for practical durability, broad design choice and value. Exposure, colour, glass area, maintenance expectations, security requirements and budget should guide the comparison.

See our steel entry door replacement service, or compare all available systems on the main door replacement and installation page.

Fiberglass Entry Door Installation Process

1. Consultation and opening review. We discuss operation, drafts, water concerns, security, appearance and required finishing.
2. System selection and quotation. The slab, frame, glass, finish, hardware and included work are documented in writing.
3. Final measurement. Falcon WD confirms opening dimensions, jamb depth, sill conditions and order details.
4. Custom production and scheduling. Timing depends on the selected panel, finish, glass and current manufacturer schedule.
5. Removal and installation. The approved work may include removal, opening preparation, fastening, insulation, sealing and specified finishing.
6. Operation check and cleanup. The installer checks alignment and locking, cleans the work area and disposes of removed materials included in the quote.

Standard Replacement and Opening Changes

A standard replacement normally retains the approved opening size and installs a complete pre-hung system. Widening the entrance, converting a window to a door, changing masonry, moving electrical components or completing structural framing is a separate scope. Falcon WD identifies additional construction separately in the quotation.

Property owners should confirm permit, condominium, heritage or other property-specific requirements when applicable. Product and installation details can be coordinated once the approved requirements are known.

What Affects Fiberglass Entry Door Pricing?

Price depends on the opening size, panel design, smooth or woodgrain finish, colour, glass, single or double configuration, sidelites, transom, frame depth, hardware, locking package and required finishing. Access, opening deterioration and separately quoted structural work may also affect the project.

Falcon WD provides a project-specific written quotation after the opening and selected system are reviewed. The quote identifies the product and installation scope so homeowners can compare options consistently.

Production Time and Warranty

Production and scheduling vary by manufacturer, panel, finish, glass and season. Smooth standard-colour systems may follow a different timeline from stained woodgrain finishes, decorative glass, sidelites, transoms or complex double-door combinations. Falcon WD confirms the expected schedule for the approved order.

Warranty terms depend on the manufacturer, product line, finish and components. Applicable product and installation warranty information is provided in writing for the selected project.

Fiberglass Entry Door Replacement Across the GTA

Falcon WD is based in Concord and serves confirmed residential replacement projects across the Greater Toronto Area and selected surrounding Ontario communities. Availability is confirmed from the project address, scope and current scheduling.

Fiberglass Entry Door Frequently Asked Questions

Are fiberglass entry doors made of solid fiberglass?

Construction varies by manufacturer and product line. A fiberglass entry system commonly combines fiberglass skins with an insulated core, reinforced edges and a compatible frame. Product specifications for the selected system identify the actual construction.

Are all fiberglass entry doors ENERGY STAR certified?

No. Certification and energy performance depend on the complete configuration, including the slab, frame, glass area and selected options. Falcon WD reviews ratings for the specific system being quoted.

Can a fiberglass door have a stained woodgrain finish?

Selected fiberglass product lines offer stainable woodgrain surfaces and factory finish options. Available grains, colours and finish warranties vary by manufacturer.

Can sidelites or a transom be included?

Yes, selected systems can include one or two sidelites, a transom, decorative glass or custom combinations when the opening and project scope allow.

Are multipoint locks available for fiberglass doors?

Multipoint locking is available on selected fiberglass systems. Compatibility and pricing depend on the slab, frame and hardware package.

What is included with fiberglass door installation?

The written quotation lists the exact scope. Typical work may include removal, installation, insulation, perimeter sealing, specified finishing, an operation check, cleanup and disposal. Interior trim, opening enlargement and structural work are included only when stated.

Request a Fiberglass Entry Door Estimate

Tell Falcon WD about the current entrance, preferred finish, glass and project address. We will confirm service availability and arrange the appropriate next step for a custom residential replacement quote.

Return to residential door replacement and installation services.