New windows or doors for your Whitby home? Falcon WD measures each opening, explains the options and prepares a clear written estimate before you order.
Schedule your FREE, no-obligation in-home estimate today.
A Whitby replacement plan can involve a long-established house near Downtown, a waterfront property in Port Whitby, or a newer home in Brooklin. Those addresses do not need the same answer. We look at wall depth, the existing frame, masonry or siding transitions, and the way each room is used before choosing a window or door.
For a house with several openings, we can plan the most urgent rooms first while keeping frame colour, visible glass lines and exterior trim consistent with later phases. If the property is designated or within a heritage district, the exterior design may also need a separate Town review. The visit turns those facts into an opening-by-opening scope, not a generic neighbourhood package.
A fogged sealed unit, a draft at the casing and staining below a sill are different complaints. We identify where the symptom starts, check how the present frame meets the wall, and discuss whether the right scope is glass, a retained-frame replacement or removal of the full assembly. A new window alone should not be presented as a cure for an unrelated water source.
ENERGY STAR-certified window options are available, subject to the exact model and configuration selected. We can compare double- and triple-pane packages, Low-E glass, hardware, screens and finishes with the complete unit’s U-factor or Energy Rating. Those tested values help compare products; they do not promise a fixed saving on any household’s bills.
A retained-frame installation may make sense when the old frame is sound, dry and suitable for the new unit. A full-frame approach gives wider access when condition, water detailing or a change in dimensions calls for it. We record what stays, what comes out, how the perimeter will be sealed, and which interior and exterior finishes the quote includes.
An entry is more than its visible door slab. We coordinate a steel or fiberglass panel with its frame, threshold, seals, glass and hardware; sidelites or a transom are measured as part of the complete opening. For a sliding patio door, we review panel travel, screen movement, rollers, lock position and the connection to the adjoining floor or deck.
The Town of Whitby Building Permits guidance lists structural alterations, including adding windows or doors, among work that may require a permit. It gives no blanket answer for like-for-like work; ask Building Services if the opening, framing, egress or scope is uncertain.
Brooklin and Werden’s Plan Neighbourhood are Whitby heritage districts. Individually designated properties may also have separate rules. Check the address and proposed exterior changes with Town Heritage Planning before placing a custom order.
PLANNING A WHITBY WINDOW OR EXTERIOR-DOOR PROJECT?
Show us the rooms and openings you want to change. We will measure the conditions and explain the selected products, installation method and finishing in a written estimate.
The proposal should answer three practical questions: what will be installed, how the existing opening will be prepared, and what the finished work will look like. Falcon WD brings product selection and installation planning into one conversation, then records the agreed details before an order is released. See completed Falcon WD projects in our gallery.
Falcon WD has served Ontario homeowners since 2010. For your Whitby home, the process begins with the actual openings, continues through a written quotation and final measurements, and ends with operation checks and a review of the completed scope.
You can check feedback beyond our own website: Falcon WD’s BBB accreditation and independent Google and HomeStars reviews provide additional context when comparing installers. Product options and written contract terms still matter more than any single rating.
We explain how whole-window ratings, glass packages and operating styles affect a particular room. Ask for the certified status and specifications of the exact unit in your quote; results after installation also depend on the existing home and how it is used.
A useful quote names each window or door and states the work around it. It should make clear whether removal, insulation, exterior capping, interior trim, cleanup and disposal are included, excluded or conditional, so competing estimates can be compared on the same scope.
Whitby’s mix of brick, siding and stone can make a coordinated exterior surprisingly detailed. We can compare frame colour, grille pattern and sightlines across the façade while still choosing the right ventilation, glass and hardware for each room. Existing jamb depth and outside clearance are checked before those visual choices are finalized.
A single-hung unit gives a room ventilation through its lower sash while the upper part remains fixed. It stays inside the wall plane, which can be useful where a Whitby walkway or deck sits close to the opening. We check sash reach, screen and clear opening before recommending it.
If you want more than one ventilation position, a double-hung model lets either sash move. Ask to see how the chosen design locks and how its sashes are reached for cleaning; those details differ by manufacturer and matter more in daily use than the style name alone.
A picture window can make a view the focal point without adding operating hardware. For a Port Whitby-facing room or a broad living-area opening, we can study how much daylight and view you gain, then add operable units nearby only where ventilation and the wall layout support them.
An awning opens from the lower edge of a top-hinged sash. Its proportions can suit a wider opening, a high wall position or a combination with fixed glass. We confirm that the handle is reachable and that the sash has room outside when opened.
A casement’s crank can be easier to use than lifting a sash in some locations. We review left- or right-hand operation, screen access and exterior clearance at the actual window. The proposed hardware and sash movement are confirmed for the selected product, not assumed from a generic illustration.
Where you need matching sightlines but not another opening sash, a fixed casement can sit beside an operating casement. The frame proportions, glass line and colour should be compared as a group so the finished elevation looks intentional rather than like mismatched replacements.
A single slider opens horizontally without projecting over a path or planting bed. For a basement or side-facing Whitby room, we check usable opening width, track access, screen arrangement and the exact model’s ratings before deciding it is the right alternative to a casement.
A double slider provides movement from both sides of the opening. That can make ventilation and access more flexible, but sash removal, screen position and cleaning features are product-specific. The quote should identify the actual configuration instead of treating every two-panel slider as interchangeable.
In a wide opening, an end-vent arrangement keeps the central view fixed while the outer sashes open. Before ordering, we balance those proportions against room use, the clear opening at each end, nearby exterior obstacles and the appearance of adjacent windows.
Bay and bow windows change the wall projection, so we assess more than the glass units. Support, weather protection above, the seat or interior return, and exterior finishing all belong in the scope. We would not propose a new projection without reviewing the existing structure and any Town approval questions.
For a kitchen-to-deck connection, we start with which side must move and where the screen and handle will travel. The measured opening, threshold height and adjoining floor or deck affect the patio-door specification as much as glass and colour. We note rollers, lock and finishing on the quote.
A steel entry system can be specified with a simple panel or a more detailed glass-and-sidelite composition. We compare privacy, daylight, swing direction and hardware with the porch or step outside, then order the slab, frame, sill and seals as compatible parts of one measured entry.
A fiberglass entrance can offer a smooth or wood-grain appearance. The best-looking panel still needs the right frame depth, threshold, glass layout and hardware for the home. We review the complete assembly with the surrounding brick or siding rather than selecting a door face from a picture alone.
Comfort, day-to-day use and curb appeal are related, but they are not the same result. The choices below show what we examine with a Whitby homeowner before promising what a replacement project can actually address.
Seal the measured opening: We check frame fit and accessible perimeter joints so the installation plan addresses drafts around the unit, not only the specifications of the new glass.
Choose glass for the room: Exposure, shade, privacy and total glass area can change which glazing package makes sense for a waterfront-facing room versus a more sheltered one.
Compare the exact unit: Ask for the selected model’s whole-window U-factor or Energy Rating, not a centre-of-glass number presented as if it describes the entire assembly.
Make hardware usable: We check how a sash, crank, screen or patio-door handle can be reached from the actual room, especially near counters, furniture or a high sill.
Plan security as a system: Locking hardware must match the chosen frame and panel. The written specification should identify what is supplied rather than imply every configuration has the same lock.
Detail the sill and outside edge: Proper support and water-shedding connections matter at the wall. We note where trim, flashing, sealant or capping will be addressed in the contracted work.
Make the street view cohesive: Compare frame colours, glass divisions and the entry design across the whole elevation even if the work is completed in phases.
Check the inside finish: Existing casing, blinds, countertop edges and nearby furniture can affect how a replacement is sized, installed and operated.
Lock in selections: Handing, opening direction, glass, screens, finish and hardware are reviewed against each measured opening before the order is released.
Whitby projects may move quickly when openings are straightforward, or need extra coordination when dimensions, materials or heritage status raise questions. The sequence below keeps the homeowner informed before production and installation.
1
At the home, we note the problem at each unit and look at frame condition, water evidence, the sill, wall finish, trim, access and how the room is used. These observations determine what needs further investigation or measurement.
2
The written quote groups each opening with its proposed product, glass and installation method. After you approve the scope, final measurements and visible details are checked so the custom order reflects the agreed choices.
3
Before release, we verify sizes, operation and finishes, and resolve known questions about altered openings or designated properties with the appropriate Town process. Scheduling follows confirmed product availability and site access.
4
The installers carry out the agreed removal, fitting, sealing and finishing. At handover, you can check operation, locks and visible trim against the quotation; cleanup and disposal follow the written scope.
READY TO PLAN YOUR WHITBY WINDOWS OR EXTERIOR DOORS?
Tell us which openings are failing or hard to use. An in-home visit can turn those notes into product choices and a written, opening-by-opening estimate.
The answers below are a starting point for a Whitby home. Municipal determinations, the signed quotation and the written product and installation warranties control the details of an individual project.
Yes. A measured plan can cover one failing unit, several rooms or a whole house. If the project is phased, note the colour, glass lines and trim of windows staying in place so future work can be coordinated.
Begin with how the room is used and what is wrong with the present opening. Ventilation, outside clearance, safe reach, screens, cleaning and the measured size help distinguish a casement, slider, hung, awning or fixed option.
The Town lists structural alterations, including adding windows or doors, among permit work. It does not give one blanket answer for every same-size replacement. Ask Whitby Building Services about changed dimensions, framing, egress or any uncertain scope before ordering.
Some properties in these heritage conservation districts, and individually designated properties elsewhere, may need Town review for exterior changes. Verify the exact address and proposed window or door details with Whitby Heritage Planning before committing to a custom design.
Yes. We can assess vinyl replacement windows, steel or fiberglass entry systems and sliding patio doors in one visit. The quote should still separate each measured opening, product, hardware and installation scope so you can choose priorities.
Compare the exact product and glass for each opening, what old material is removed, retained-frame or full-frame work, insulation, sill and perimeter details, interior and exterior finishing, cleanup and the written terms. A lower total may reflect a narrower scope.
No specific household saving is guaranteed by a label. Certification describes tested performance of the exact qualifying unit. The existing home, orientation, installation details, climate and household use also affect results.
Ask for the manufacturer coverage for the selected products and the installation terms covering the contracted work. Check duration, components, exclusions and the claim process in writing before approving the custom order.
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
I wanted to highly recommend the services of Falcon Windows and Doors. They installed my new windows last week, and I couldn’t be happier with the results. The windows are beautiful, high-quality, and have made our home noticeably warmer and quieter — we now hear much less noise from the street.
From start to finish, Andriy’s service was impeccable. I sent an email early on a Saturday morning, and he reached out the same day to schedule a visit and provide a quote. We placed the order, and within just five weeks, the windows were ready for installation.
On installation day, three very polite and professional gentlemen arrived early. They carefully covered all the floors to prevent any damage and worked efficiently and nonstop until everything was completed. They also cleaned up thoroughly afterward.
Andriy personally came on the day of installation to ensure everything was in perfect order.
I truly recommend Falcon Windows and Doors for your next project — you’ll be as impressed as I am!
Read more
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
Read more
Explore Falcon WD's project gallery and these product guides before choosing a configuration. The actual Whitby quote will identify the models, measurements and installation work proposed for your home.
Modern glass is no longer just a transparent barrier between you and the outdoors. In the 2026 high-performance market, a window replacement acts as a
Thermal efficiency in 2026 is no longer defined by how high you can crank the furnace. Instead, it is defined by how effectively your home
A home’s ability to retain heat in 2026 depends as much on mechanical compression as it does on the glass itself. While many property owners
400 Applewood Crescent #100 Concord, ON L4K 0C3
Email: info@falconwindows.ca
Toll Free: 1(833) 932-5266
Local: (647) 977-1010
© 2019 – 2026 www.falconwindows.ca – All Rights Reserved.
