Custom vinyl windows, steel and fiberglass entry doors, and sliding patio doors for Oakville homeowners. Falcon WD provides product guidance, precise measurement, professional installation, exterior finishing, cleanup and written warranty documentation.
Schedule your FREE in-home, no-obligation consultation today!
Oakville includes older homes near Old Oakville, Bronte and Kerr Village, established neighbourhoods such as Glen Abbey, River Oaks and West Oak Trails, and newer communities in North Oakville. Different opening sizes, wall assemblies, exterior finishes and design requirements call for accurate measurement and a project-specific recommendation—not a one-size-fits-all package.
Falcon WD supplies and installs custom replacement windows, exterior entry doors and patio doors for residential projects across Oakville. We review the existing opening, explain suitable product and installation options, and confirm the included work in a written quotation before the order is placed.
We replace aging, drafty, damaged and inefficient residential windows with custom vinyl systems selected for the opening and the homeowner’s priorities. Available configurations include casement, awning, fixed, picture, single- and double-hung, slider, end-vent slider, bay and bow, and European-style tilt-turn windows.
Depending on the product line and size, options may include double- or triple-pane insulated glass, Low-E coatings, argon gas, warm-edge spacers, interior and exterior colours, brickmould, screens and upgraded hardware. Retrofit and full-frame installation methods are reviewed separately because the right method depends on the condition of the existing frame, sill, jambs, exterior finish and interior trim.
Falcon WD supplies and installs custom steel and fiberglass entry doors, single and double-door systems, doors with sidelites or transoms, and sliding patio doors. Homeowners can select from different glass designs, colours, panels, hardware, screens, sill finishes and locking options, including multipoint locks on compatible systems.
Each door is ordered for the measured opening and approved configuration. Standard replacement work is quoted separately from structural enlargement, masonry cutting, electrical relocation or permit and heritage-approval requirements. The written proposal identifies the products, installation method and finishing included in the project.
Planning a window or door replacement project in Oakville?
Request a clear, project-specific estimate from Falcon WD.
A successful replacement project depends on more than the product label. Accurate measurements, a suitable installation method, clearly defined finishing and careful on-site work all affect operation, appearance and long-term performance. Falcon WD manages these details from consultation through installation and cleanup.
Residential Replacement Focus
Falcon WD has served Ontario homeowners since 2010 and focuses on residential window, entry-door and patio-door replacement.
Independent Reputation
Falcon WD is a BBB Accredited Business and has earned recognition and verified homeowner reviews through HomeStars.
ENERGY STAR Certified Windows
All replacement windows supplied by Falcon WD are ENERGY STAR certified. We help homeowners compare the glass, frame, colour, hardware and installation options that best suit each opening.
Professional Installation
Approved projects include careful removal, installation, exterior finishing, cleanup and disposal as stated in the written quotation.
Oakville’s varied housing stock includes older wood-frame openings, brick exteriors, renovated homes, established subdivisions and newer construction. Product dimensions, installation depth, brickmould, jamb extensions, casing and exterior capping must be matched to the actual opening. Falcon WD helps homeowners compare practical options without assuming that the same configuration is right for every property.
Some homes are located within Oakville heritage conservation districts. Exterior alterations may be subject to Town of Oakville requirements, so property owners should confirm whether heritage review or other approval is required before ordering. Falcon WD does not determine municipal approval requirements, but the final product and installation scope can be coordinated once the approved project requirements are known.
Single-Hung
A traditional vertical style with one operable sash and one fixed sash.
Double-Hung
Both sashes operate vertically, providing flexible ventilation and convenient cleaning on compatible models.
Picture
A fixed window designed for a wide view, natural light and strong thermal performance.
Awning
Top-hinged and opening outward from the bottom, often suited to wider or shorter openings.
Casement
Side-hinged and crank-operated for ventilation, a clear opening and a compression seal.
Fixed Casement
A non-operating window designed to coordinate visually with operating casements.
Single Slider
One sash slides horizontally while the other remains fixed.
Double Slider
Two horizontally sliding sashes provide ventilation from either side on compatible models.
End-Vent Slider
A wide three-section configuration with operating end sashes and a fixed centre panel.
Bay & Bow
Multi-panel projection windows that add dimension, interior space and a wider view.
Sliding Patio Doors
Custom patio-door systems provide natural light, smooth access to outdoor areas and space-saving operation. Glass, screens, colours, handles and security options vary by product line.
Steel Entry Doors
Steel doors offer a durable, practical exterior surface with a wide range of panel, glass, colour and hardware options.
Fiberglass Entry Doors
Fiberglass doors are available in smooth and wood-grain finishes and are selected for appearance, stability, insulation and project exposure.
Replacement can improve comfort, operation, appearance and weather resistance when the product and installation method suit the opening. Results vary by the existing home, selected product, glass package, installation scope and occupant use.
Well-selected replacement windows and doors can reduce drafts, raise interior surface temperatures and improve comfort near exterior openings. All replacement windows supplied by Falcon WD are ENERGY STAR certified. When comparing options, consider the complete window system—not only the number of glass panes. Important factors include U-factor, Energy Rating, solar heat gain, air leakage, Low-E coating, spacer design and the quality of installation.
Actual household energy savings vary based on the condition of the existing windows, the home, the selected configuration and occupant behaviour.
New frames, seals, insulated glass, hardware and properly completed exterior finishing can improve resistance to air and water infiltration. Operating style, opening size, exposure and maintenance requirements should be considered before choosing a product.
Security is affected by the complete assembly, including the frame, glass, locks, installation and surrounding wall. Compatible entry doors may be upgraded with multipoint locks, reinforced hardware and selected glass options, but no residential door or window should be described as impossible to breach.
Replacement windows and doors can update the exterior while preserving the proportions and character of the home. Options may include black or custom-coloured frames, simulated divided lites, decorative glass, sidelites, transoms and coordinated patio doors.
Dark exterior colours, oversized glass and specialty configurations may have product-specific size, reinforcement, heat-absorption or warranty limitations. These details should be confirmed for the exact unit before ordering. Heritage properties may also require municipal review.
Every project is documented around the measured openings and approved scope. The process below applies to typical residential replacements; specialty construction and structural changes may require additional steps.
1
Consultation and Site Review
We review the existing windows or doors, project priorities, exterior conditions and the work the homeowner wants included.
2
Product Selection and Final Measurement
After the configuration and quotation are approved, final measurements and order details are confirmed before custom production.
3
Custom Production and Scheduling
Production is typically about three to four weeks after final measurement and deposit. Specialty products, custom colours and seasonal demand can affect timing.
4
Installation, Finishing and Cleanup
Our installation team completes the approved removal, installation and finishing, checks operation, cleans the work area and disposes of removed products as stated in the quote.
Ready to plan your Oakville replacement project?
Request an in-home estimate for custom windows or exterior doors.
These answers cover common planning questions. Product specifications, included work, warranty terms and municipal requirements must be confirmed for the individual project.
Replacement may be worth considering when windows have persistent drafts, difficult operation, recurring water entry, damaged frames, failed insulated glass, deteriorated exterior components or comfort problems that cannot be corrected through normal maintenance. The cause should be assessed before assuming that every issue requires a complete new window.
Neither method is automatically better for every opening. Retrofit installation may be suitable when the existing frame is structurally sound and the project is designed around keeping it. Full-frame replacement removes the old frame and provides access to the rough opening, but it can involve more interior and exterior finishing. Falcon WD reviews the existing frame, sill, wall depth, brickmould and trim before recommending the scope.
Both can be appropriate. Triple-pane glass can improve thermal performance and interior glass temperature, but it also adds weight and cost and may have size limitations. The complete window rating, glass coatings, orientation, opening size and budget should be considered rather than selecting by pane count alone.
Yes, black and other interior or exterior colours are available in selected product lines. Colour availability, finish type, reinforcement, maximum size, heat exposure and warranty conditions vary by manufacturer and configuration, so they are confirmed before ordering.
Options include steel and fiberglass entry doors, single and double-door systems, sidelites, transoms, decorative or privacy glass, sliding patio doors, different colours and compatible locking upgrades. Every door is custom ordered for the measured opening and approved design.
Custom production is typically about three to four weeks after final measurement and deposit, although specialty glass, colours, door systems, supplier schedules and seasonal demand can extend the timeline. On-site installation time depends on the number of openings, installation method and existing conditions.
Warranty terms depend on the selected manufacturer, product line, glass, hardware, finish and installation scope. Falcon WD provides the applicable written warranty information for the approved project rather than representing one universal warranty for every product and component.
Some properties are located within heritage conservation districts or may be individually designated. Exterior changes can be subject to Town of Oakville requirements. The property owner should confirm the applicable heritage and permit requirements before ordering. Falcon WD can coordinate the quoted product and installation after the approved requirements are known, but does not determine or obtain municipal approvals.
Explore practical information about replacement windows, exterior doors, glass options, installation, energy performance and common homeowner questions.
Modern glass is no longer just a transparent barrier between you and the outdoors. In the 2026 high-performance market, a window replacement acts as a
Thermal efficiency in 2026 is no longer defined by how high you can crank the furnace. Instead, it is defined by how effectively your home
A home’s ability to retain heat in 2026 depends as much on mechanical compression as it does on the glass itself. While many property owners
400 Applewood Crescent #100 Concord, ON L4K 0C3
Email: info@falconwindows.ca
Toll Free: 1(833) 932-5266
Local: (647) 977-1010
© 2019 – 2026 www.falconwindows.ca – All Rights Reserved.
