Falcon WD provides measured replacement windows, custom steel and fiberglass entrances, and sliding patio doors for Mississauga houses. We first document the opening, wall finish, sill, trim, access and operating requirements so the product and installation method are selected for the actual home.
Request a FREE Mississauga in-home assessment and a written quotation based on your measured openings and selected products.
Mississauga has a substantial low-rise residential market. The City reports that detached homes make up about 70% of local housing. That creates many different replacement conditions across brick, siding and mixed-cladding houses, so we inspect frame depth, sill condition, trim, previous capping and the wall connection before recommending retrofit or full-frame work.
Applewood, Lorne Park, Rathwood, Lisgar and Creditview are among the neighbourhoods identified in the City’s housing discussion. Homes on the same street can still have different renovations, exposures and window generations. Product and installation choices therefore come from the measured property—not a neighbourhood assumption.
Sticking sashes, failed locks, fogging between panes, deteriorated frames and recurring drafts are practical reasons to assess a Mississauga window. The inspection should include more than glass: sill drainage, perimeter sealants, insulation, interior trim and the exterior wall connection all affect the replacement scope.
All replacement windows supplied by Falcon WD are ENERGY STAR certified. Available specifications include double- or triple-pane insulated glass, Low-E coatings, argon fill, warm-edge spacers, screens, exterior colours and compatible hardware. We compare whole-unit U-factor and Energy Rating with orientation, shading, size and operating style rather than using pane count as the only measure.
A retrofit may suit an opening whose retained frame is square, dry and structurally appropriate. Full-frame work allows the old frame and perimeter to be exposed when condition, dimensions or finishing requirements call for it. Mississauga brick returns, siding, jamb depth, casing, capping and water-management details are recorded before manufacturing.
Mississauga entrance projects can be configured as single or double steel or fiberglass systems with sidelites, transoms, privacy or decorative glass and coordinated hardware. Sliding patio doors are specified separately for panel direction, screen operation, sill, glass and locking requirements. Every component must fit the same measured opening.
The City of Mississauga lists same-size replacement of an existing window or door among projects that do not need a building permit. A new window or an increase to an existing window opening does require a permit. Confirm masonry, header, structural framing, egress and any heritage-property requirements with the City before products are ordered.
Comparing several replacement windows, a new entrance system or a patio door for a Mississauga house?
Book an on-site measurement so the quotation records the actual openings, product selections, access and finishing scope.
A replacement unit performs as part of the wall—not as glass and frame alone. Falcon WD coordinates measurement, product approval, access, insulation, perimeter sealing, exterior finishing and operation checks from the first Mississauga visit through completion.
Falcon WD has completed residential replacement work for Ontario homeowners since 2010. Mississauga projects follow a documented sequence from inspection and written scope through final measurement, order review, installation, finishing and handover.
Falcon WD is BBB Accredited, and independent customer feedback is available through Google, BBB and HomeStars. These sources let Mississauga homeowners evaluate reputation separately from the claims made on this page.
We explain whole-window ratings, operating style, glass package, Low-E selection, colour, screens and hardware in plain language. ENERGY STAR certification describes tested product performance; it is not presented as a guaranteed percentage reduction on a particular household bill.
Each opening is itemized in the quotation so the selected unit and contracted work stay clear. Removal, fitting, insulation, sealing, capping or finishing, hardware checks, cleanup and disposal are listed where included.
Mississauga houses combine many façade materials and opening sizes, including brick, siding, stone and mixed finishes. Frame colour, grille layout, jamb depth, casing and exterior capping can be coordinated across the elevation while each opening keeps its correct technical specification.
Single-hung windows ventilate through a vertically moving lower sash while the upper section remains fixed. Their non-projecting operation can be useful beside a Mississauga walkway, driveway or deck.
With a double-hung configuration, both sashes can move. Selected models also provide easier room-side access for cleaning while giving the homeowner more control over upper and lower ventilation.
Picture windows maximize fixed glass and daylight. In wider Mississauga openings, they can be proportioned with operating casements or awnings so view, ventilation and exterior sightlines work together.
Top-hinged awning windows open outward from the bottom and can suit shorter or higher openings. Exterior clearance, interior use and required ventilation are checked before the size and placement are finalized.
Side-hinged casements close against compression seals and provide full-sash ventilation. Handing, crank clearance, screens and nearby shrubs, paths or rooflines are verified at the Mississauga opening.
Fixed casements do not ventilate, but their frame profile can match adjacent operating casements. They are useful where a consistent multi-window composition matters on the exterior elevation.
A single slider pairs a horizontal moving sash with a fixed pane. It avoids outward projection and can fit openings beside patios, paths or other limited exterior clearances.
Both sashes move in a double slider. Screen location, locks and removable or tilt-in cleaning features vary by product line and are confirmed in the written specification.
An end-vent slider places operating sashes on both sides of a wider fixed centre panel. This layout provides balanced ventilation without projecting beyond the wall.
Bay and bow replacements affect more than the window unit because the projection, support, roof or capping and interior ledge form one assembly. The existing Mississauga opening must be assessed before dimensions or configuration are changed.
Sliding patio doors connect the interior with a deck, patio or yard without requiring hinged-door swing space. We verify active-panel direction, screen movement, sill, glass and locking hardware for the measured doorway.
Custom steel entrances can combine the chosen panel, glass, colour, handles, lockset, sidelites and transom. Specifying slab, frame and hardware together keeps dimensions, weatherseals and operation compatible.
Fiberglass entry systems are offered in smooth and wood-grain finishes. The panel, glass, colour, sidelites, transom, sill and hardware are selected as one coordinated doorway for the Mississauga exterior.
Replacement planning should connect product ratings with site conditions. Glass, frame, hardware, insulation, sealants, sill details and finishes must function together where the new unit meets the existing Mississauga wall.
Control perimeter leakage: Correct sizing, suitable insulation and continuous sealing address air paths around the frame instead of concentrating only on centre-of-glass performance.
Match glass to exposure: Pane count, Low-E coating, gas fill, spacer, orientation and exterior shading are reviewed as one room-specific package.
Compare whole-unit ratings: Lower U-factor and higher Energy Rating indicate stronger tested performance, while size and operating configuration still affect the exact unit.
Plan daily use: Sash proportions, patio-door rollers, weatherstripping, locks and entrance hardware should suit the occupants and room layout.
Specify compatible security: Reinforced window locks, upgraded entrance hardware and available multipoint systems must match the selected window or door.
Manage water at the wall: Sill condition, sealants, flashing and capping should direct water away while maintaining a continuous exterior seal.
Coordinate the exterior: Frame colours, grille patterns, door glass and hardware can create consistent sightlines across different opening sizes.
Record interior constraints: Jamb depth, casing, handles, blinds and room-side clearances are checked before the factory order.
Confirm the custom order: Final dimensions, handing, opening direction, glass, colour, screens and hardware are reviewed before manufacturing begins.
A staged process keeps the first quotation, final site measurements and manufacturing order consistent. Multiple openings, custom colours, specialty shapes and any proposed masonry or framing changes receive additional review before production.
1
We document operation, glass and frame condition, sill and perimeter, adjacent brick or cladding, interior trim, access and the homeowner’s priorities at each opening.
2
After proposal approval, final dimensions and every choice—operating style, glass, colour, screens, hardware, jamb and finishing—are recorded opening by opening.
3
Measurements and specifications are checked before the order is released. Installation timing is then coordinated around confirmed product availability, crew access and the documented Mississauga site conditions.
4
Installation follows the written scope for removal, fitting, insulation, sealing and finishing. Operating units and locks are tested, work areas are cleaned, and replaced products are removed when disposal is included.
Ready to compare replacement options for your Mississauga house?
Request an in-home measurement for windows, a steel or fiberglass entrance, or a sliding patio door.
The answers below address common Mississauga planning questions. The signed quotation, final specifications and applicable written warranty documents remain the controlling project records.
Arrange an assessment when windows are difficult to open or lock, insulated glass fogs between panes, frames or hardware are damaged, or drafts and moisture appear around the perimeter. The entire opening should be examined before the replacement method is selected.
Falcon WD offers casement, awning, fixed casement, picture, single- and double-hung, single and double slider, end-vent slider, bay and bow configurations. Dimensions, ventilation, egress where applicable, product limits and room layout guide the choice.
The City of Mississauga lists same-size replacement of an existing window or door among projects that do not need a building permit. New windows and increases to existing window openings require a permit. Confirm masonry, header, structural, egress and heritage-property requirements with the City before ordering.
No. Double- and triple-pane packages can both be appropriate. Compare the complete ENERGY STAR certified window using U-factor, Energy Rating, operating style, Low-E coating, gas fill, spacer, orientation and budget.
Yes. Falcon WD supplies custom steel and fiberglass entry systems, sidelites, transoms and sliding patio doors. Glass, colour, screens, sill, handles, panel direction and locking hardware are matched to the measured Mississauga opening.
The written quotation can include removal, installation, insulation, perimeter sealing, exterior capping or finishing, operation checks, cleanup and disposal. Interior trim, jamb extensions, masonry or structural changes are included only when specifically listed.
Pricing reflects opening count and dimensions, configuration, glass, colours, hardware, replacement method, access and finishing. Falcon WD prepares the written quotation after assessing the Mississauga openings and requested work.
Manufacturer coverage can extend up to 25 years depending on the selected product line, glass and components. Installation coverage depends on the contracted work. The applicable written terms are provided for review before the order is finalized.
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
I wanted to highly recommend the services of Falcon Windows and Doors. They installed my new windows last week, and I couldn’t be happier with the results. The windows are beautiful, high-quality, and have made our home noticeably warmer and quieter — we now hear much less noise from the street.
From start to finish, Andriy’s service was impeccable. I sent an email early on a Saturday morning, and he reached out the same day to schedule a visit and provide a quote. We placed the order, and within just five weeks, the windows were ready for installation.
On installation day, three very polite and professional gentlemen arrived early. They carefully covered all the floors to prevent any damage and worked efficiently and nonstop until everything was completed. They also cleaned up thoroughly afterward.
Andriy personally came on the day of installation to ensure everything was in perfect order.
I truly recommend Falcon Windows and Doors for your next project — you’ll be as impressed as I am!
Read more
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
Read more
These Falcon WD guides explain whole-window ratings, modern glass performance and multipoint door hardware for Mississauga homeowners comparing replacement options.
Modern glass is no longer just a transparent barrier between you and the outdoors. In the 2026 high-performance market, a window replacement acts as a
Thermal efficiency in 2026 is no longer defined by how high you can crank the furnace. Instead, it is defined by how effectively your home
A home’s ability to retain heat in 2026 depends as much on mechanical compression as it does on the glass itself. While many property owners
400 Applewood Crescent #100 Concord, ON L4K 0C3
Email: info@falconwindows.ca
Toll Free: 1(833) 932-5266
Local: (647) 977-1010
© 2019 – 2026 www.falconwindows.ca – All Rights Reserved.
