Falcon WD supplies made-to-measure ENERGY STAR certified replacement windows, custom steel and fiberglass entry systems, and sliding patio doors for Oakville homes. We assess the opening, exterior cladding, sill, trim, access and daily-use requirements before specifying the product and installation method.
Request a FREE Oakville in-home measurement and a written quotation based on the actual openings, selected products and included finishing.
The 2021 Census records 73,555 occupied private dwellings in Oakville: 58.6% are single-detached houses, 17% are row houses and 4.5% are semi-detached. That varied housing stock creates different frame depths, sill details, exterior finishes and previous renovation conditions. We inspect the actual opening before recommending retrofit or full-frame work.
Bronte, Glen Abbey, River Oaks, Falgarwood and West Oak Trails are among Oakville’s established residential areas, while growth continues north of Dundas Street. Even nearby houses can differ in wall construction, previous capping, trim and exposure, so the specification is based on the measured property rather than a neighbourhood label.
Windows that bind, no longer lock correctly, show moisture between panes or allow recurring perimeter drafts should be assessed as complete openings. For an Oakville project, we check the frame, sill, drainage path, sealants, insulation, interior casing and the connection to brick, siding or other cladding before defining the work.
All replacement windows supplied by Falcon WD are ENERGY STAR certified. Depending on the selected line and size, choices include double- or triple-pane insulated glass, Low-E coatings, argon gas, warm-edge spacers, screens, exterior colours and compatible hardware. Whole-unit U-factor and Energy Rating are considered together with orientation, shading, glass area and operating style.
Retrofit installation can be appropriate when the retained frame is sound, square, dry and suitable for the new unit. Full-frame replacement exposes the old frame and perimeter when condition, dimensions or finishing requirements justify removal. Oakville brick returns, siding interfaces, jamb depth, casing and exterior capping are measured before the order is released.
Oakville homeowners can configure single or double steel and fiberglass entrances with sidelites, transoms, privacy or decorative glass, coordinated handles and compatible multipoint locks. Sliding patio doors are reviewed separately for active-panel direction, screen travel, sill condition, glass package and locking hardware. The full assembly is ordered to the measured doorway.
The Town of Oakville lists same-size replacement of an existing window or door among projects that do not require a building permit. A new window or an increase to an existing window opening does require a permit. Proposed masonry cuts, header or framing changes, egress alterations and property-specific approvals should be confirmed with the Town before products are ordered.
Comparing replacement windows, a new entrance or a patio door for an Oakville home?
Arrange an on-site measurement so the quotation records the openings, selected specifications, access and finishing responsibilities.
A replacement window or door must work with the surrounding wall assembly. Falcon WD coordinates site review, measurements, product approval, access, insulation, exterior sealing, finishing and operation checks so the Oakville project follows one documented scope.
Falcon WD has served Ontario homeowners since 2010. Oakville projects move from opening inspection and written quotation to final measurement, order verification, installation, finishing and handover.
Falcon WD is BBB Accredited, and homeowners can review independent feedback on Google, BBB and HomeStars. Those third-party sources provide a separate record of customer experience.
We compare whole-unit ratings, operating style, glass package, Low-E selection, colour, screens and hardware in practical terms. ENERGY STAR certification identifies tested product performance; actual household energy use still depends on the home and how it is operated.
The quotation identifies each window or door, the approved specification and the installation work included. Removal, fitting, insulation, sealing, capping or finishing, hardware checks, cleanup and disposal are recorded where they form part of the contract.
Oakville homes combine brick, siding, stone and mixed exteriors with many opening proportions. Colour, grille layout, jamb depth, interior casing and exterior capping can be coordinated across the façade while each unit retains the specification appropriate to its room and opening.
A single-hung window opens through the lower sash while the upper section stays fixed. Because nothing projects outside, this style can work beside an Oakville walkway, driveway or deck where clearance matters.
Double-hung windows provide movable upper and lower sashes. Compatible models allow convenient room-side cleaning and flexible ventilation without requiring exterior swing space.
A picture window uses a fixed sash to prioritize daylight, view and thermal performance. Wider Oakville openings can combine a central picture unit with operating casements or awnings for planned ventilation.
Awning windows are hinged at the top and open outward along the bottom edge. They can suit wider or higher wall positions when exterior clearance, screen location and room ventilation are considered during measurement.
Casement windows swing outward from a side hinge and close against compression seals. We confirm handing, crank and screen access, plus clearance from landscaping, paths and roof details around the Oakville opening.
Fixed casement units provide no ventilation, but their frame and glass proportions can align with adjacent operating casements. This supports consistent sightlines across multi-window elevations.
A single slider combines one horizontal operating sash with one fixed section. Its non-projecting motion can suit rooms beside patios, side yards or other restricted exterior areas.
Double sliders allow both horizontal sashes to move. Lock design, screen placement and removable or tilt-in cleaning features depend on the chosen product line and are recorded before ordering.
End-vent sliders use a fixed centre pane with operating sashes at both ends. The wide format offers ventilation from either side without sash projection beyond the exterior wall.
Bay and bow windows project beyond the wall, so the units, support, roof or capping and interior seat must be assessed together. Existing Oakville framing and dimensions are reviewed before the projection or configuration is altered.
Sliding patio doors provide access to a deck or yard while conserving interior and exterior swing space. Panel direction, screen travel, sill condition, glass package, handle and lock are confirmed for the measured Oakville doorway.
Steel entrance systems can coordinate panel style, decorative or privacy glass, colour, handles, locks, sidelites and transom. Door slab, frame, sill and hardware are specified as one compatible assembly.
Fiberglass entry doors are available in smooth and wood-grain finishes with multiple glass and panel designs. Colour, sidelites, transom, sill and hardware are selected together for the Oakville opening and exterior design.
Product ratings and site conditions must be considered together. Glass, frame, hardware, insulation, sealants, sill drainage and finishes all influence how the new unit connects to the existing Oakville wall.
Seal the perimeter: Accurate sizing, compatible insulation and continuous interior and exterior seals address leakage around the frame, not only performance through the glass.
Select glass for the room: Pane count, Low-E coating, gas fill, spacer, orientation, shading and glass area are reviewed as one opening-specific package.
Use complete ratings: Lower U-factor and higher Energy Rating indicate stronger tested performance, while unit size and operating configuration remain part of the comparison.
Plan practical operation: Sash proportions, handle reach, patio-door rollers, weatherstripping and locks should suit the occupants and room layout.
Coordinate security components: Window locks, entrance hardware and available multipoint systems must be compatible with the selected frame, panel and installation.
Complete the exterior connection: Sill condition, sealants, flashing and capping must manage water while maintaining a continuous, serviceable exterior seal.
Coordinate façade details: Frame colours, grille patterns, door glass and hardware can align the design across different opening sizes.
Check room-side conditions: Jamb depth, casing, handles, blinds and furniture clearances are documented before the factory order.
Verify every selection: Final dimensions, handing, opening direction, glass, colour, screens, sill and hardware are checked before manufacturing.
A defined sequence connects the first site review, written quotation, final measurement and factory order. Projects with multiple openings, specialty shapes, custom colours or proposed structural changes receive additional verification before production.
1
We inspect operation, frame and glass condition, sill and perimeter details, nearby brick or cladding, interior trim, access and the homeowner’s priorities for each opening.
2
After the quotation is approved, final dimensions and all selections—style, glass, colour, screens, hardware, jamb and finishing—are recorded for every ordered unit.
3
Measurements, handing and specifications are checked before release to manufacturing. Installation is scheduled after product availability is confirmed and the site-access requirements are reviewed.
4
The crew completes the contracted removal, fitting, insulation, sealing and finishing. Operating sashes, doors and locks are checked, the work area is cleaned, and old products are removed when disposal is included.
Ready to compare options for your Oakville home?
Request an in-home measurement for replacement windows, a steel or fiberglass entrance, or a sliding patio door.
These answers cover frequent Oakville planning questions. The signed quotation, approved specifications and applicable written warranty documents remain the controlling records for an individual project.
An assessment is appropriate when sashes bind, locks fail, insulated glass fogs internally, frames or hardware are damaged, or drafts and moisture repeatedly appear around the perimeter. The complete opening should be inspected before retrofit or full-frame work is selected.
Available styles include casement, awning, fixed casement, picture, single- and double-hung, single and double slider, end-vent slider, bay and bow. Opening dimensions, ventilation, egress where applicable, product limits and room use determine the practical choice.
The Town of Oakville lists same-size replacement of an existing window or door among work that does not require a building permit. A new window or an increase to an existing window opening does require one. Confirm proposed masonry cuts, header or framing changes, egress work and any property-specific approvals with the Town before ordering.
Not automatically. Both double- and triple-pane packages can be appropriate. Compare the complete ENERGY STAR certified window using U-factor, Energy Rating, operating style, Low-E coating, gas fill, spacer, orientation, glass area and budget.
Yes. Falcon WD supplies custom steel and fiberglass entrances, sidelites, transoms and sliding patio doors. Panel design, glass, colour, screens, sill, handles, direction and locking hardware are matched to the measured doorway.
The written quotation identifies the selected units and contracted work. Removal, installation, insulation, perimeter sealing, exterior capping or finishing, operation checks, cleanup and disposal are included only where stated; interior trim, jamb extensions and structural work must also be listed explicitly.
Price depends on the number and size of openings, configuration, glass package, colours, hardware, replacement method, access and finishing. Falcon WD prepares a written quotation after the Oakville openings and requested scope are assessed.
Manufacturer coverage can extend up to 25 years depending on the selected product line, glass and components. Installation coverage follows the contracted work. The applicable written terms are provided for review before the order is finalized.
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
I wanted to highly recommend the services of Falcon Windows and Doors. They installed my new windows last week, and I couldn’t be happier with the results. The windows are beautiful, high-quality, and have made our home noticeably warmer and quieter — we now hear much less noise from the street.
From start to finish, Andriy’s service was impeccable. I sent an email early on a Saturday morning, and he reached out the same day to schedule a visit and provide a quote. We placed the order, and within just five weeks, the windows were ready for installation.
On installation day, three very polite and professional gentlemen arrived early. They carefully covered all the floors to prevent any damage and worked efficiently and nonstop until everything was completed. They also cleaned up thoroughly afterward.
Andriy personally came on the day of installation to ensure everything was in perfect order.
I truly recommend Falcon Windows and Doors for your next project — you’ll be as impressed as I am!
Read more
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
Read more
Trustindex verifies that the original source of the review is Google.
Read more
These Falcon WD guides explain whole-window ratings, modern glass performance and multipoint door hardware for Oakville homeowners comparing replacement options.
Modern glass is no longer just a transparent barrier between you and the outdoors. In the 2026 high-performance market, a window replacement acts as a
Thermal efficiency in 2026 is no longer defined by how high you can crank the furnace. Instead, it is defined by how effectively your home
A home’s ability to retain heat in 2026 depends as much on mechanical compression as it does on the glass itself. While many property owners
400 Applewood Crescent #100 Concord, ON L4K 0C3
Email: info@falconwindows.ca
Toll Free: 1(833) 932-5266
Local: (647) 977-1010
© 2019 – 2026 www.falconwindows.ca – All Rights Reserved.
